High-Performance Heavy-Duty Membrane
High Wear Resistance | Flexible Design
Polyurethane waterproofing solutions provide a flexible, tough, resilient monolithic membrane across a wide array of water, chemical, and abrasive environments. Our systems provide high-performance solutions for industrial, corrosion, and waterproofing applications, providing long-term asset protection.
To discuss your next project or for more information on using polyurethanes for waterproofing applications, please get in touch with us using the information below.
Phone: +61 3 8779 0100 or 1300 736 963
Email: info@pacificurethanes.com
Waterproofing For Both Domestic & Commercial Applications
Protecting Your Assets
- Used as coating or liner in slurry tanks, water tanks, secondary containment, waste-water management applications
- Portable water containment (AS4020 approved) irrigation canal and aqueduct lining and repair
- Protection of sewage digesters and clarifying tanks
- Protection of bridges, tunnels and sewer manhole preservation and restoration
- Protection of above and below ground pipes, containment liners for spill protection
- Non-skid and corrosion-resistant flooring, walls and roofs
- Protecting metal structures, bridges, storage tanks, pipes, and coating equipment
- Waterproofing roofs, foundations, decks, and walkways
- Waterproofing and protecting polyurethane and EPS foam
- Water retention or decorative ponds water features
- Waterproofing materials used in water parks and recreation facilities, including natural swimming ponds
- Port, shipyard, and marine corrosion protection chemical-resistant lining for storage tanks, pipes and cargo areas
- Boat hull impact and abrasion protection non-slip and non-skid deck or floor coating
- Corrosion, abrasion wear and tear protection in cargo handling areas
- Encapsulation of deck floats, aquaculture tank lining
- Marine animal enclosure and training tank linings
- Protection or restoration of pilings above or below the water line
- High Elasticity
- High Abrasion Resistance
- Excellent Chemical Resistance
- Low Temperature Resistance
- Fast Reactivity
- Seamless Membranes
- Excellent Substrate Adhesion
- Spray Applied
High Performance Heavy-Duty Membrane for Waterproofing
Our Integrated Technological Solutions
We deliver a complete solution, integrating global technologies through our collaborations with market leading organisations.
Water Infrastructure
- Aegis Robotic Technologies – Insitu Relining of Pipe Internals
- Potable Water Approved Systems
- Premera Chemshield – High Chemical Resistance
- Reservoirs
- Wastewater Treatment Plants – Kemko 161
Transport Assets
- Cargo Holds
- Dump Truck Trays
- Rail Cart Protection
Waterproofing Products
Is a high pressure, hybrid polyurea system for general purpose use in waterproofing and other industrial and maintenance applications. This system is a two component, 1:1, 100% solids, fast set, liquid applied, modified polyurea liner system for metal, concrete, fiberglass and wood surfaces.
Features:
- Seamless
- High Build
- Tough and Elastomeric
- Quick Drying
- Chemical Resistant
- Low Temperature Flexibility
- Abrasion and Impact Resistant
Typical Uses:
- Truck Bed Surfaces
- Cargo Holds
- Utility Vehicles
- Horse Trailers
- Cargo liners
- Industrial Floorings
- Boat Linings
- Walkways
- Waterproof Decking
- Containment Areas
- Encapsulation of Fiberglass Bodies and Polystyrene Foams
Is a fast, set rapid curing, 100% solids, flexible, aromatic, two component spray polyurea that can be applied to suitably prepared concrete and metal surfaces. Its extremely fast gel time makes it suitable for applications down to -20°F (-29°C). It may be applied in single or multiple applications without appreciable sagging and is relatively insensitive to moisture and temperature allowing application in most temperatures.
Features:
- Zero VOC (100% solids)
- Seamless
- Excellent thermal Stability
- Odourless
- No Toxic Vapours
- Non-Reactive
- Meets USDA Criteria
- Good Chemical Resistance
- Coats Carbon or Mild Steel Metals without Primer
- Installed with or without Reinforcement in Transitional Areas
Typical Uses:
- Airports
- Power Plants
- Refineries
- Structural Steel
- Fertilizer Plants
- Warehouse Floors
- Mining Operations
- Cold Storage Facilities
- Food Processing Plants
- Landfill Containment
- Marine Environments
- Paper and Pulp Mills
- Secondary Containment
- Parking Garage Decks
- Walkways and Balconies
- Water and Wastewater Treatment
- Industrial and Manufacturing Facilities
Has NSF-61 approval for direct contact with potable water and is recommended for use as a coating or lining on suitably primed carbon steel, non-ferrous metal and concrete. Polyurethane spray coatings are typically used as a coating or liner in slurry tanks, water tanks, secondary containment and waste-water management applications.
It offers a tack free time of less than five minutes and exhibits 20-30% elongation upon curing with 65 Shore D hardness.
Features:
- High Build, Quick Dry
- Chemical Resistant
- Low Temperature Flexibility
- 100% Solids
- Abrasion and Impact Resistant
- Horizontal Surface Application
- Plural Component Spray Application
Typical Uses:
- Petrochemical Plants
- Mining
- Pipelining and Repair
- Power Plants
- Pulp and Paper Plants
- Manholes
- Secondary Containment
- Pen Stocks
- Concrete/Steel Water Storage Tanks
- Water and Wastewater Treatment Plants
Water & Wastewater Products
Is a two-component, high solids, liquid applied, epoxy-polyamine primer with unique penetrating characteristics. Also is ANSI/ NSF 61 and AS:4020 approved providing confidence that all products used are suitable for direct contact with potable water.
Features:
- Seamless
- Excellent Adhesion
- Low Viscosity
- Low VOC
Typical Uses:
- Concrete
- Plywood
- Carbon Steel
Is a fast, set rapid curing, 100% solids, flexible, aromatic, two component spray polyurea that can be applied to suitably prepared concrete and metal surfaces. Its extremely fast gel time makes it suitable for applications down to -20°F (-29°C). It may be applied in single or multiple applications without appreciable sagging and is relatively insensitive to moisture and temperature allowing application in most temperatures.
Features:
- Zero VOC (100% solids)
- Seamless
- Excellent thermal Stability
- Odourless
- No Toxic Vapours
- Non-Reactive
- Meets USDA Criteria
- Good Chemical Resistance
- Coats Carbon or Mild Steel Metals without Primer
- Installed with or without Reinforcement in Transitional Areas
Typical Uses:
- Airports
- Power Plants
- Refineries
- Structural Steel
- Fertilizer Plants
- Warehouse Floors
- Mining Operations
- Cold Storage Facilities
- Food Processing Plants
- Landfill Containment
- Marine Environments
- Paper and Pulp Mills
- Secondary Containment
- Parking Garage Decks
- Walkways and Balconies
- Water and Wastewater Treatment
- Industrial and Manufacturing Facilities
Has NSF-61 approval for direct contact with potable water and is recommended for use as a coating or lining on suitably primed carbon steel, non-ferrous metal and concrete. Polyurethane spray coatings are typically used as a coating or liner in slurry tanks, water tanks, secondary containment and waste-water management applications.
It offers a tack free time of less than five minutes and exhibits 20-30% elongation upon curing with 65 Shore D hardness.
Features:
- High Build, Quick Dry
- Chemical Resistant
- Low Temperature Flexibility
- 100% Solids
- Abrasion and Impact Resistant
- Horizontal Surface Application
- Plural Component Spray Application
Typical Uses:
- Petrochemical Plants
- Mining
- Pipelining and Repair
- Power Plants
- Pulp and Paper Plants
- Manholes
- Secondary Containment
- Pen Stocks
- Concrete/Steel Water Storage Tanks
- Water and Wastewater Treatment Plants
Marine Products
Is a two-component, high solids, liquid applied, epoxy-polyamine primer with unique penetrating characteristics. Also is ANSI/ NSF 61 and AS:4020 approved providing confidence that all products used are suitable for direct contact with potable water.
Features:
- Seamless
- Excellent Adhesion
- Low Viscosity
- Low VOC
Typical Uses:
- Concrete
- Plywood
- Carbon Steel
Is a fast, set rapid curing, 100% solids, flexible, aromatic, two component spray polyurea that can be applied to suitably prepared concrete and metal surfaces. Its extremely fast gel time makes it suitable for applications down to -20°F (-29°C). It may be applied in single or multiple applications without appreciable sagging and is relatively insensitive to moisture and temperature allowing application in most temperatures.
Features:
- Zero VOC (100% solids)
- Seamless
- Excellent thermal Stability
- Odourless
- No Toxic Vapours
- Non-Reactive
- Meets USDA Criteria
- Good Chemical Resistance
- Coats Carbon or Mild Steel Metals without Primer
- Installed with or without Reinforcement in Transitional Areas
Typical Uses:
- Airports
- Power Plants
- Refineries
- Structural Steel
- Fertilizer Plants
- Warehouse Floors
- Mining Operations
- Cold Storage Facilities
- Food Processing Plants
- Landfill Containment
- Marine Environments
- Paper and Pulp Mills
- Secondary Containment
- Parking Garage Decks
- Walkways and Balconies
- Water and Wastewater Treatment
- Industrial and Manufacturing Facilities
Has NSF-61 approval for direct contact with potable water and is recommended for use as a coating or lining on suitably primed carbon steel, non-ferrous metal and concrete. Polyurethane spray coatings are typically used as a coating or liner in slurry tanks, water tanks, secondary containment and waste-water management applications.
It offers a tack free time of less than five minutes and exhibits 20-30% elongation upon curing with 65 Shore D hardness.
Features:
- High Build, Quick Dry
- Chemical Resistant
- Low Temperature Flexibility
- 100% Solids
- Abrasion and Impact Resistant
- Horizontal Surface Application
- Plural Component Spray Application
Typical Uses:
- Petrochemical Plants
- Mining
- Pipelining and Repair
- Power Plants
- Pulp and Paper Plants
- Manholes
- Secondary Containment
- Pen Stocks
- Concrete/Steel Water Storage Tanks
- Water and Wastewater Treatment Plants
Case Studies / Referral Work
Solving Complex Infrastructure Problems With Unique Solutions
Waterproofing & Protection Case Study
South Taylor Reservoir Project
Pacific Urethanes provided an eco-friendly polyurethane foam insulation for a large residential development, significantly reducing energy consumption and carbon footprint.
Corrosion Protection Case Study
Molymet Facility Bund
Pacific Urethanes provided an eco-friendly polyurethane foam insulation for a large residential development, significantly reducing energy consumption and carbon footprint.
Waterproofing & Wear Protection Case Study
Orange Base Hospital Critical Waterproofing
Pacific Urethanes provided an eco-friendly polyurethane foam insulation for a large residential development, significantly reducing energy consumption and carbon footprint.
Warning: Trying to access array offset on value of type bool in /home/pacifure/public_html/wp-content/themes/theme/modules/content-with-image-thumbnails/class-content-with-image-thumbnails.php on line 153
Bridge Deck Protection Case Study
Queensland Rail Bridge Deck
Pacific Urethanes provided an eco-friendly polyurethane foam insulation for a large residential development, significantly reducing energy consumption and carbon footprint.