WORLD-CLASS TECHNOLOGIES
High Performance Spray Elastomers
Polycoat Products is a leading manufacturer of customised, high-performance Polyurea and Polyurethane coatings which have proven performance over 20 years. Developed through extensive research and testing procedures, the company’s elastomer offerings are designed to suit various industries and performance criteria. Their coating solutions are designed with the contractor, architect, engineer or specifier in mind.
Polycoat Products spray elastomers provide high-performance solutions for industrial, corrosion and waterproofing applications providing long term asset protection.
Find Out More!
To discuss your next project or for more information, please contact us:
Phone: +61 3 8779 0100 (request for Specification Support)
eMail: specifypacific@pacificurethanes.com
HIGH PERFORMANCE
Polyurea & Polyurethane Coatings
EXTENSIVE
Research & Testing
LONG TERM
Asset Protection
EXTENSIVE PRODUCT RANGE
Mining Industry Products
Polyprime 21 is a two-component, high solids, liquid applied, epoxy-polyamine primer with unique penetrating characteristics. Polyprime 21 is ANSI/ NSF 61 and AS:4020 approved providing confidence that all products used are suitable for direct contact with potable water.
Polyeuro® 5502F is a fast, set rapid curing, 100% solids, flexible, aromatic, two component spray polyurea that can be applied to suitably prepared concrete and metal surfaces. Its extremely fast gel time makes it suitable for applications down to -20°F (-29°C). It may be applied in single or multiple applications without appreciable sagging and is relatively insensitive to moisture and temperature allowing application in most temperatures.
Features:
- Zero VOC (100% solids)
- Seamless
- Excellent thermal Stability
- Odourless
- No Toxic Vapours
- Non-Reactive
- Meets USDA Criteria
- Good Chemical Resistance
- Coats Carbon or Mild Steel Metals without Primer
- Installed with or without Reinforcement in Transitional Areas
Typical Uses:
- Airports
- Power Plants
- Refineries
- Structural Steel
- Fertilizer Plants
- Warehouse Floors
- Mining Operations
- Cold Storage Facilities
- Food Processing Plants
- Landfill Containment
- Marine Environments
- Paper and Pulp Mills
- Secondary Containment
- Parking Garage Decks
- Walkways and Balconies
- Water and Waste Water Treatment
- Industrial and Manufacturing Facilities
Polyeuro® 1050H has NSF-61 approval for direct contact with potable water, and is recommended for use as a coating or lining on suitably primed carbon steel, non-ferrous metal and concrete. Polyurethane spray coatings are typically used as a coating or liner in slurry tanks, water tanks, secondary containment and waste-water management applications.
It offers a tack free time of less than five minutes and exhibits 20-30% elongation upon curing with 65 Shore D hardness.
Features:
- High Build, Quick Dry
- Chemical Resistant
- Low Temperature Flexibility
- 100% Solids
- Abrasion and Impact Resistant
- Horizontal Surface Application
- Plural Component Spray Application
Typical Uses:
The TuffShieldTM HAR is a revolutionary high wear resistant specialty polyurea which is a 100% solids, flexible, two component, high-performance-spray elastomer.
TuffshieldTM HAR offers exceptional performance in tensile strength, high-tear, high-chemical and impact resistance in severely demanding applications against abrasion.
Features:
- Exceptional Abrasion Resistance
- Exceptional Hydrolytic Stability
- High Tear and Impact Resistance
- Excellent Impact Dampening
- Excellent Thermal Stability
- Zero VOC (100% Solids)
- Low Temperature Flexibility
- Good Chemical Resistance
- Coats Carbon or Mild Steel Metals without Primer
Typical Uses:
Waterproofing Products
Polyeuro® MPL series is a high pressure, hybrid polyurea system for general purpose use in waterproofing and other industrial and maintenance applications. This system is a two component, 1:1, 100% solids, fast set, liquid applied, modified polyurea liner system for metal, concrete, fiberglass and wood surfaces.
Features:
- Seamless
- High Build
- Tough and Elastomeric
- Quick Drying
- Chemical Resistant
- Low Temperature Flexibility
- Abrasion and Impact Resistant
Typical Uses:
Polyeuro® 5502F is a fast, set rapid curing, 100% solids, flexible, aromatic, two component spray polyurea that can be applied to suitably prepared concrete and metal surfaces. Its extremely fast gel time makes it suitable for applications down to -20°F (-29°C). It may be applied in single or multiple applications without appreciable sagging and is relatively insensitive to moisture and temperature allowing application in most temperatures.
Features:
- Zero VOC (100% solids)
- Seamless
- Excellent thermal Stability
- Odourless
- No Toxic Vapours
- Non-Reactive
- Meets USDA Criteria
- Good Chemical Resistance
- Coats Carbon or Mild Steel Metals without Primer
- Installed with or without Reinforcement in Transitional Areas
Typical Uses:
- Airports
- Power Plants
- Refineries
- Structural Steel
- Fertilizer Plants
- Warehouse Floors
- Mining Operations
- Cold Storage Facilities
- Food Processing Plants
- Landfill Containment
- Marine Environments
- Paper and Pulp Mills
- Secondary Containment
- Parking Garage Decks
- Walkways and Balconies
- Water and Waste Water Treatment
- Industrial and Manufacturing Facilities
Polyeuro® 1050H has NSF-61 approval for direct contact with potable water, and is recommended for use as a coating or lining on suitably primed carbon steel, non-ferrous metal and concrete. Polyurethane spray coatings are typically used as a coating or liner in slurry tanks, water tanks, secondary containment and waste-water management applications.
It offers a tack free time of less than five minutes and exhibits 20-30% elongation upon curing with 65 Shore D hardness.
Features:
- High Build, Quick Dry
- Chemical Resistant
- Low Temperature Flexibility
- 100% Solids
- Abrasion and Impact Resistant
- Horizontal Surface Application
- Plural Component Spray Application
Typical Uses:
Water Management Products
Polyprime 21 is a two-component, high solids, liquid applied, epoxy-polyamine primer with unique penetrating characteristics. Polyprime 21 is ANSI/ NSF 61 and AS:4020 approved providing confidence that all products used are suitable for direct contact with potable water.
Polyeuro® 5502F is a fast, set rapid curing, 100% solids, flexible, aromatic, two component spray polyurea that can be applied to suitably prepared concrete and metal surfaces. Its extremely fast gel time makes it suitable for applications down to -20°F (-29°C). It may be applied in single or multiple applications without appreciable sagging and is relatively insensitive to moisture and temperature allowing application in most temperatures.
Features:
- Zero VOC (100% solids)
- Seamless
- Excellent thermal Stability
- Odourless
- No Toxic Vapours
- Non-Reactive
- Meets USDA Criteria
- Good Chemical Resistance
- Coats Carbon or Mild Steel Metals without Primer
- Installed with or without Reinforcement in Transitional Areas
Typical Uses:
- Airports
- Power Plants
- Refineries
- Structural Steel
- Fertilizer Plants
- Warehouse Floors
- Mining Operations
- Cold Storage Facilities
- Food Processing Plants
- Landfill Containment
- Marine Environments
- Paper and Pulp Mills
- Secondary Containment
- Parking Garage Decks
- Walkways and Balconies
- Water and Waste Water Treatment
- Industrial and Manufacturing Facilities
Polyeuro® 1050H has NSF-61 approval for direct contact with potable water, and is recommended for use as a coating or lining on suitably primed carbon steel, non-ferrous metal and concrete. Polyurethane spray coatings are typically used as a coating or liner in slurry tanks, water tanks, secondary containment and waste-water management applications.
It offers a tack free time of less than five minutes and exhibits 20-30% elongation upon curing with 65 Shore D hardness.
Features:
- High Build, Quick Dry
- Chemical Resistant
- Low Temperature Flexibility
- 100% Solids
- Abrasion and Impact Resistant
- Horizontal Surface Application
- Plural Component Spray Application
Typical Uses:
Industrial Flooring Products
Polyeuro® MPL series is a high pressure, hybrid polyurea system for general purpose use in waterproofing and other industrial and maintenance applications. This system is a two component, 1:1, 100% solids, fast set, liquid applied, modified polyurea liner system for metal, concrete, fiberglass and wood surfaces.
Features:
- Seamless
- High Build
- Tough and Elastomeric
- Quick Drying
- Chemical Resistant
- Low Temperature Flexibility
- Abrasion and Impact Resistant
Typical Uses:
The TuffShieldTM HAR is a revolutionary high wear resistant specialty polyurea which is a 100% solids, flexible, two component, high-performance-spray elastomer.
TuffshieldTM HAR offers exceptional performance in tensile strength, high-tear, high-chemical and impact resistance in severely demanding applications against abrasion.
Features:
- Exceptional Abrasion Resistance
- Exceptional Hydrolytic Stability
- High Tear and Impact Resistance
- Excellent Impact Dampening
- Excellent Thermal Stability
- Zero VOC (100% Solids)
- Low Temperature Flexibility
- Good Chemical Resistance
- Coats Carbon or Mild Steel Metals without Primer
Typical Uses:
Marine Products
Polyprime 21 is a two-component, high solids, liquid applied, epoxy-polyamine primer with unique penetrating characteristics. Polyprime 21 is ANSI/ NSF 61 and AS:4020 approved providing confidence that all products used are suitable for direct contact with potable water.
Polyeuro® 5502F is a fast, set rapid curing, 100% solids, flexible, aromatic, two component spray polyurea that can be applied to suitably prepared concrete and metal surfaces. Its extremely fast gel time makes it suitable for applications down to -20°F (-29°C). It may be applied in single or multiple applications without appreciable sagging and is relatively insensitive to moisture and temperature allowing application in most temperatures.
Features:
- Zero VOC (100% solids)
- Seamless
- Excellent thermal Stability
- Odourless
- No Toxic Vapours
- Non-Reactive
- Meets USDA Criteria
- Good Chemical Resistance
- Coats Carbon or Mild Steel Metals without Primer
- Installed with or without Reinforcement in Transitional Areas
Typical Uses:
- Airports
- Power Plants
- Refineries
- Structural Steel
- Fertilizer Plants
- Warehouse Floors
- Mining Operations
- Cold Storage Facilities
- Food Processing Plants
- Landfill Containment
- Marine Environments
- Paper and Pulp Mills
- Secondary Containment
- Parking Garage Decks
- Walkways and Balconies
- Water and Waste Water Treatment
- Industrial and Manufacturing Facilities
Polyeuro® 1050H has NSF-61 approval for direct contact with potable water, and is recommended for use as a coating or lining on suitably primed carbon steel, non-ferrous metal and concrete. Polyurethane spray coatings are typically used as a coating or liner in slurry tanks, water tanks, secondary containment and waste-water management applications.
It offers a tack free time of less than five minutes and exhibits 20-30% elongation upon curing with 65 Shore D hardness.
Features:
- High Build, Quick Dry
- Chemical Resistant
- Low Temperature Flexibility
- 100% Solids
- Abrasion and Impact Resistant
- Horizontal Surface Application
- Plural Component Spray Application
Typical Uses:
Food & Agriculture Products
Polyprime 21 is a two-component, high solids, liquid applied, epoxy-polyamine primer with unique penetrating characteristics. Polyprime 21 is ANSI/ NSF 61 and AS:4020 approved providing confidence that all products used are suitable for direct contact with potable water.
Polyeuro® 5502F is a fast, set rapid curing, 100% solids, flexible, aromatic, two component spray polyurea that can be applied to suitably prepared concrete and metal surfaces. Its extremely fast gel time makes it suitable for applications down to -20°F (-29°C). It may be applied in single or multiple applications without appreciable sagging and is relatively insensitive to moisture and temperature allowing application in most temperatures.
Features:
- Zero VOC (100% solids)
- Seamless
- Excellent thermal Stability
- Odourless
- No Toxic Vapours
- Non-Reactive
- Meets USDA Criteria
- Good Chemical Resistance
- Coats Carbon or Mild Steel Metals without Primer
- Installed with or without Reinforcement in Transitional Areas
Typical Uses:
- Airports
- Power Plants
- Refineries
- Structural Steel
- Fertilizer Plants
- Warehouse Floors
- Mining Operations
- Cold Storage Facilities
- Food Processing Plants
- Landfill Containment
- Marine Environments
- Paper and Pulp Mills
- Secondary Containment
- Parking Garage Decks
- Walkways and Balconies
- Water and Waste Water Treatment
- Industrial and Manufacturing Facilities
Polyeuro® 1050H has NSF-61 approval for direct contact with potable water, and is recommended for use as a coating or lining on suitably primed carbon steel, non-ferrous metal and concrete. Polyurethane spray coatings are typically used as a coating or liner in slurry tanks, water tanks, secondary containment and waste-water management applications.
It offers a tack free time of less than five minutes and exhibits 20-30% elongation upon curing with 65 Shore D hardness.
Features:
- High Build, Quick Dry
- Chemical Resistant
- Low Temperature Flexibility
- 100% Solids
- Abrasion and Impact Resistant
- Horizontal Surface Application
- Plural Component Spray Application
Typical Uses:
Other Products
Polycoat-Staingard 7072SC is an aliphatic, polyaspartic, environmentally-friendly surface topcoat for waterproofing membrane systems. Polycoat-Staingard 7072SC is quick curing and specifically formulated to be installed in thin film applications. These coatings have properties that include superior color and gloss retention, with low VOCs and odour.
Polycoat Products manufactures products in different VOC’s ranging from 100 to 340 gms/liter to comply with VOC requirement in various regions.
Features:
- Quick Cure
- Color Stable
- High Tensile Strength
- High Gloss
- Abrasion Resistant
- Very Durable
- Excellent Weatherability
- Seamless Waterproofing Membrane
- UV Resistant For Superior Gloss Retention
Typical Uses: